Phytec phyCORE-i.MX 6, Hardware Manual

Page: 15 / 82

Introduction
©
PHYTEC Messtechnik GmbH 2016 L-808e_2
1
1 Introduction
The phyCORE-i.MX 6 belongs to PHYTEC’s phyCORE System on Module family. The
phyCORE SOMs represent the continuous development of PHYTEC System on Module
technology. Like its mini-, micro- and nanoMODUL predecessors, the phyCORE boards
integrate all core elements of a microcontroller system on a subminiature board and are
designed in a manner that ensures their easy expansion and embedding in peripheral
hardware developments.
As independent research indicates that approximately 70 % of all EMI (Electro Magnetic
Interference) problems stem from insufficient supply voltage grounding of electronic
components in high frequency environments, the phyCORE board design features an
increased pin package. The increased pin package allows dedication of approximately 20 %
of all connector pins on the phyCORE boards to Ground. This improves EMI and EMC
characteristics and makes it easier to design complex applications meeting EMI and EMC
guidelines using phyCORE boards even in high noise environments.
phyCORE boards achieve their small size through modern SMD technology and multi-layer
design. In accordance with the complexity of the module, 0402-packaged SMD
components and laser-drilled microvias are used on the boards, providing phyCORE users
with access to this cutting edge miniaturization technology for integration into their own
design.
The phyCORE-i.MX 6 is a subminiature (40 mm x 50 mm) insert-ready System on Module
populated with the NXP® Semiconductor i.MX 6 microcontroller. Its universal design
enables its insertion in a wide range of embedded applications. All controller signals and
ports extend from the controller to high-density pitch (0.5 mm) connectors aligning two
sides of the board, allowing it to be plugged like a "big chip" into a target application.
Precise specifications for the controller populating the board can be found in the
applicable controller reference manual or datasheet. The descriptions in this manual are
based on the NXP® Semiconductor i.MX 6. No description of compatible microcontroller
derivative functions is included, as such functions are not relevant for the basic
functioning of the phyCORE-i.MX 6.
1.1 Features of the phyCORE-i.MX 6
The phyCORE-i.MX 6 offers the following features:
•
Insert-ready, sub-miniature (40 mm x 50 mm) System on Module (SOM) subassembly
in low EMI design, achieved through advanced SMD technology
•
Populated with the NXP® Semiconductor i.MX 6 microcontroller (BGA624 packaging)
•
1.0 GHz core clock frequency (optional 1.2 GHz)
•
Boot from different memory devices (NAND Flash (standard))