Phytec phyCORE-i.MX 6, Hardware Manual

Page: 12 / 82

phyCORE
®
-i.MX 6 [PCM-058]
x ©
PHYTEC Messtechnik GmbH 2016 L-808e_2
Declaration of Electro Magnetic Conformity of the PHYTEC phyCORE
®
-i.MX 6
PHYTEC System on Module (henceforth products) are designed for installation
in electrical appliances or as dedicated Evaluation Boards (i.e.: for use as a test and
prototype platform for hardware/software development) in laboratory environments.
Caution!
PHYTEC products lacking protective enclosures are subject to damage by ESD and, hence,
may only be unpacked, handled or operated in environments in which sufficient
precautionary measures have been taken in respect to ESD-dangers. It is also necessary
that only appropriately trained personnel (such as electricians, technicians and engineers)
handle and/or operate these products. Moreover, PHYTEC products should not be operated
without protection circuitry if connections to the product's pin header rows are longer
than 3 m.
PHYTEC products fulfill the norms of the European Union’s Directive for Electro Magnetic
Conformity only in accordance to the descriptions and rules of usage indicated in this
hardware manual (particularly in respect to the pin header row connectors, power
connector and serial interface to a host-PC).
Implementation of PHYTEC products into target devices, as well as user modifications and
extensions of PHYTEC products, is subject to renewed establishment of conformity to, and
certification of, Electro Magnetic Directives. Users should ensure conformance following
any modifications to the products as well as implementation of the products into target
systems.