PHILIPS Respironics Trilogy 202, User Manual, Page: 88 / 179

Chapter 5 Viewing and Changing Settings
79
Changing the Device Settings and Alarms
From the Main Menu screen, use the Up/Down button to highlight
the Settings and Alarms menu, and press the Right button to select
the menu. A screen similar to the one below appears.
Device Settings Common to All Therapy Modes
Some of the settings on this menu will vary depending on the
therapy mode you select. The section below describes all of the
settings that are common to all therapy modes.
Dual Prescription Setting
You can turn the dual prescription setting on or off. Enable the
setting if you want to create two separate prescriptions for the
patient. For instance, you may want to set up a daytime prescription
and then a separate nighttime prescription. If you enable this setting,
then the menu options on the Main Menu will change to include
three new options:
Switch to Primary/Secondary Settings
•
Primary Settings and Alarms
•
Secondary Settings and Alarms
•
Settings and Alarms Screen
Note:
In the Options menu
described later in this chapter,
you can specify the Pressure
Units displayed by the device,
choosing either cm H
2
O, hPa, or
mBar.