pathway choreo, User Manual

Page: 36 / 153

28
a Cue or Memory. If more than one Playlist is in use at one time, this feature
records updates to that Playlist without including information from other Playlists
or active Memories.
Network
NOTE
•
Write down your existing settings and values before making any
changes to these settings.
These settings are used when data is sent to your lights using the Ethernet
port. Data sent using the
DMX port (s) alone is not affected.
The following descriptions assume a basic knowledge of Ethernet networking
terms, concepts and practices.
Network Mode:
Determines the method Choreo uses to obtain a network IP
address and subnet mask.
Pathport : Sets the IP address using the standard Pathport method. IP
address is generated in the 10.x.x.x range, using the serial number of the
console. Subnet mask is always set to Class A, or 255.0.0.0. Not editable.
Static:
The user enters a specific IP address and subnet mask. Care must be
taken that no other device on the network uses the same IP address.
Automatic: Choreo waits to be assigned an IP address by an on-line service
such as a DHCP server. If no server is found, Choreo will use the last address
assigned to it. Not editable.
Advanced (default):
To determine its IP address and subnet mask, Choreo
will: a) seek an address from a DHCP server; b) utilize an IP generated using
the standard Pathport rules; c) auto-generate an IP address in the
169.254.x.x range using Avahi.
While in
Advanced
, you may also set the Base Address determination mode to be
Dynamic, Static or Off; turn the Pathport method on or off; or enable or disable
Avahi auto-generation. With the exception of Avahi, the Advanced option simply
provides simultaneous access to the methods shown individually under the other
option headings.