manualshive.com logo in svg

pathway choreo, User Manual

Share
Download
pathway choreo User Manual Download Page 67

Tasks 

 59 

 

Desk Lock Light:

 

Available only from the Intensity tool.  Freezes all attributes of the selected 
light(s). Individual attributes of the light may be changed and included in 

future cues or memories, as described above. 

  
The Intensity of Desk-Locked lights are not affected by the Grand Master or 
Dead Blackout button.  Even with the Grand Master at 0%, the lights with a 
locked level will remain ‘on’. 

  

Tech Unlock: 

 

Tech Lock may only be set using the 

neato

™ iOS app, available from the 

Apple App store.  

neato

 can remotely freeze, or lock, specific attributes of a 

fixture.  For example, applying Tech Lock to the intensity of a fixture will 

allow refocusing of the light while other work proceeds, without affecting 
recorded levels. 
                        The console can always override a Tech Lock, and restore 

direct control, by touching the unlock icon under the Tech Lock tool.  A cue 
may include a Cue 

Action

 to release all Tech Locks.  

  

The 

Information

 screen 

 shows how many lights are currently Tech Locked, 

under the “Locks” tab. 

Defaulting Attributes 

 Sets and captures the selected light’s attribute to the default value.  The 

default results are dependent on the light and will be recorded in any 

subsequent record operations. 
  
Without entering CONTROL | ADVANCED 

, from CONTROL | 

 

ATTRIBUTES  

 will force the default values. 

Summary of Contents for choreo


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands