pathway choreo User Manual Download

Page: 72 / 153

Color Fade:

Sets a time for the color transition in a light. If no value is set,

any color fade will use the Fade time.

Color Delay:

Sets a delay time between pressing GO and starting the Color

Fade.

Shape Timing Options

Shape Fade

: Sets a time for the shape transition, such as zooming in or

changing between gobos. If no value is set, any shape transition will use
the Fade time.

Shape Delay

: Sets a delay time between pressing GO and starting the

Shape Fade.

See

How to Record a Cue

for full step by step instructions.

Adding Playlists

By default, two playlists are shown. To add further Playlists, to delete existing
Playlists, or to rename a Playlist, touch the

More...

icon at the right end of the

Record Cue toolbar. The Playlist Library will be shown.

To add a Playlist, touch Add New

Record Library

Library allows you to capture certain attributes for reuse in different Cues or

Memories and to aid in programming.

Record Color

Capture a light’s current color. Touch the Color icon on the tool bar. Select

the record location.  Name the color library, if desired.  Touch the Done icon to
record, or the Cancel icon to start again.  The saved color may only be applied to
the same light(s) in use when the library was recorded.

Summary of Contents for choreo


























































































































































Search results

Summary of Contents for choreo

Reviews:

Related manuals for choreo

Brands by name

Popular brands

pathway choreo, User Manual

Search results

Summary of Contents for choreo

Reviews:

Related manuals for choreo

Brands by name

Popular brands