pathway choreo User Manual Download

Page: 69 / 153

Tasks

Record Memory

Memory saves the current look into a slider. Memories are represented by

rectangles across the top of the screen.

Any fader location may be chosen by touching it.  The selected location is
indicated by a red outline.  By default, fader 1 or the next available fader is
selected.  Although only 8 faders are shown at one time, up to 400 memory

locations are available in a single Memory Page. Use the Left

and

Right

navigation arrows to access the additional

banks

within the page.

Once a fader location is selected, the Memory may be labeled by touching the
keyboard

icon next to Name.

Bump button modes

and timings may also be

adjusted.

Fade up and fade down times may be associated with each bump button’s
action.  By default the buttons have a timing of zero seconds.

See

How to Record a Memory

for step by step instructions on recording

Memories.

Summary of Contents for choreo


























































































































































Search results

Summary of Contents for choreo

Reviews:

Related manuals for choreo

Brands by name

Popular brands

pathway choreo, User Manual

Search results

Summary of Contents for choreo

Reviews:

Related manuals for choreo

Brands by name

Popular brands