pathway choreo User Manual Download

Page: 79 / 153

Tasks

Changing Memory Pages and Banking Within a Page

From PLAY | MEMORIES

you can freely change Memory Pages just by

touching a new page in the green toolbar.

Each Memory Page can have up to 160 Memories recorded in it and you can

always

Add another Memory Page

. You can only see 8 Memories at a time, but

using the arrows

you can bank within the page. See also

Airplane

View in Play Memories

Memory Bump Button Modes

There are five different modes for Memory Bump buttons. They can be set when

you

Record the Memory

or by editing

the Properties of a Memory in

PLAY |

MEMORIES

. The five modes are:

Momentary

The Memory is active only while the button is pressed.

Toggle

Press to recall the Memory. Press again to release the Memory.

Radio

When several buttons are configured as part of a Radio Group, only
one button and its Memory may be active at any time. Radio Groups
may be named and each Memory Page may have multiple Radio
Groups.

Summary of Contents for choreo


























































































































































Search results

Summary of Contents for choreo

Reviews:

Related manuals for choreo

Brands by name

Popular brands

pathway choreo, User Manual

Search results

Summary of Contents for choreo

Reviews:

Related manuals for choreo

Brands by name

Popular brands