pathway choreo User Manual Download

Page: 97 / 153

Tasks

The display will change to the SELECT task, with a blue background to

indicate Blind mode. The clock on the status bar changes to ‘Blind’,
followed by the label of the item being edited.

An icon with a pin in the upper right corner of each cell indicates the light’s

live state.

Choose the lights

you wish to adjust.

Use the normal

CONTROL

methods to adjust their attributes.

Once the changes are completed, press UPDATE

to accept the

changes, or RELEASE

to discard the changes to the cue and exit

Blind.

Play Mixed Mode

In Mixed Playback mode, the current playback status is shown for Memories

and for two Playlist, one on the left and one on the right. Although you may play

back cues using

and

etc., you cannot activate Memories. Touch

in the green Mixed Mode toolbar to change the Memory Page or Playlists

shown.

By touching and dragging you can drag-and-drop  (move) Memories within the
Memory page or as a new cue in a Playlist. You may also move cues between
Playlists or to a Memory page as a new Memory.

Toggle Shift

to copy versus moving the items.

NOTE

EDIT

is not available in Mixed mode.

Summary of Contents for choreo


























































































































































Search results

Summary of Contents for choreo

Reviews:

Related manuals for choreo

Brands by name

Popular brands

pathway choreo, User Manual

Search results

Summary of Contents for choreo

Reviews:

Related manuals for choreo

Brands by name

Popular brands