pathway choreo User Manual Download

Page: 19 / 153

How To...

From the green Play toolbar select Transport

then touch the Go

icon that appears on the Transport cluster of icons above the toolbar.

You can also press the appropriate (left or right) Go button

on the

console.

NOTE

•

The first cue is selected by default, or double tap the cue you wish to

run. A green arrow will appear inside the cue cell. Press the “Go”
button to execute the cue in recorded time.

•

Triple tapping on a Cue will go to that cue immediately.

•

Cue that are presently fading are green. Cues that are active but not
fading are yellow.

•

Touch the Up/Down arrow icons

next to the cue list to

move through the cues. To scroll the view to the top of the Playlist,

toggle Shift

, then touch the Up arrow icon

. To go to the

bottom of the Playlist, press and hold the Shift key, then touch the

Down arrow icon

•

Cues that are indented and have this icon

will follow on from the

previous cue automatically. You won't press Go to run these cues.

•

To pause a running cue, press Pause

•

When the Playlist is active but cues are not fading, press Back

cut back to the previous cue.

Summary of Contents for choreo


























































































































































Search results

Summary of Contents for choreo

Reviews:

Related manuals for choreo

Brands by name

Popular brands

pathway choreo, User Manual

Search results

Summary of Contents for choreo

Reviews:

Related manuals for choreo

Brands by name

Popular brands