pathway choreo User Manual Download

Page: 20 / 153

How to Edit, Move, Copy or Delete a Cue or
Memory

Touch the Play icon

to open the PLAY task.

Touch the Playlist icon

to edit Cues or the Memory icon

to edit

Memories.

Press Edit

A ‘do-not-enter’ icon

will appear on each cue or memory. Touching it

will rotate it vertically

and a DELETE button will appear. Touch

delete it or press

again to cancel the delete.

Use the arrows

to change Memory timings and

bump button

operation. For Cues, use the Up/Down arrow icons

to page

through the timing and other cue properties.

To move a cue or memory, touch the ‘hamburger’ icon

, then drag the

selection to a new location and drop. To copy a cue or memory, toggle

Shift

before touching the hamburger icon, then drag and drop to the

new location.

Press Edit

to complete the Edit action.

See

Play Mixed Mode

to move and copy Cues and Memories between Playlists

and Memory Pages or

Cue Timings and Placement

Summary of Contents for choreo


























































































































































Search results

Summary of Contents for choreo

Reviews:

Related manuals for choreo

Brands by name

Popular brands

pathway choreo, User Manual

Search results

Summary of Contents for choreo

Reviews:

Related manuals for choreo

Brands by name

Popular brands