pathway choreo User Manual Download

Page: 12 / 153

•

You can press the blank spaces between the Up

and Down

arrows in the list to jump through the list faster than just using the

arrow buttons.

How to Set Intensity

Select

a light in the

Grid

by touching it. The cell’s outline will turn red.

From the

Task Bar

at the bottom of the screen, touch the

Control

icon.

Touch the Intensity icon to access the

Intensity tool

bar and various

tools.

•

Attriburtes

Find the Intensity control on the lower right and run your

finger in the track to set a level as a percentage.

•

Libraries:

Select from standard intensity levels.

•

IRGB:

Use the on-screen faders to adjust intensity and RGB values.

(Applicable only if you light has color mixing attributes.)

•

Effect:

See

How to Set an Effect

How to Set a Color, Position or Shape
Attribute

As well as

Intensity

, the

CONTROL

task will display up to three other attribute

families depending on the capabilities of the selected light. Only attributes
supported by the selected light are shown.

Summary of Contents for choreo


























































































































































Search results

Summary of Contents for choreo

Reviews:

Related manuals for choreo

Brands by name

Popular brands

pathway choreo, User Manual

Search results

Summary of Contents for choreo

Reviews:

Related manuals for choreo

Brands by name

Popular brands