pathway choreo User Manual Download

Page: 99 / 153

Tasks

NOTE

You may also set the TYPE from 'At Time' or 'At Sunrise' etc. to 'None'. That
way the event will just be skipped until you set the Type again and you don't
need to setup the actions again.

Event Type

None

Event is disabled. Change Event Type to 'None' if you think you'll use the event in
the future and want to keep it in your show file.

At Time

Set a specific start time of day for the associated action.

Sunrise

The associated action will begin at local sunrise, as determined by the
astronomical clock setting under System Preferences.

Sunset

The associated action will begin at local sunset, as determined by the
astronomical clock setting under System Preferences.

Before Sunrise

The associated action will begin prior to local sunrise as determined by the offset
time.

After Sunrise

The associated action will begin after local sunrise as determined by the offset
time.

Before Sunset

The associated action will begin prior to local sunset as determined by the offset

time.

Summary of Contents for choreo


























































































































































Search results

Summary of Contents for choreo

Reviews:

Related manuals for choreo

Brands by name

Popular brands

pathway choreo, User Manual

Search results

Summary of Contents for choreo

Reviews:

Related manuals for choreo

Brands by name

Popular brands