Paradyne COMSPHERE
3610, Operator'S Manual

Page: 235 / 310

Async Terminal Operation
D-11 3610-A2-GB91-90 July 1999
Password Change
Password security protects access to the DSU. When
password security is already set up at the DCP, the
password must be entered at the async terminal exactly
as originally input, including upper- or lowercase alpha
characters (e.g., if you entered 234abc originally,
entering 234ABC would not be accepted as a valid
password).
To set up or change the password:
"
Procedure
1. Select Pswrd from the Async Terminal Menu
screen ( Figure D-8 ); the Password Menu Screen
appears (Figure D-12).
PRESS: 1 – Chang
2. The Password input screen appears
( Figure D-13 ). The password can be up to 8
characters. Valid password characters include:
•
Alpha characters a to z; upper- or lowercase
•
Numeric 0 to 9
•
Characters:
# (pound sign)
- (dash)
. (period)
/ (backslash)
If an invalid password character is entered, the
entry is ignored. If the terminal is set up for
sound, the terminal beeps when there is an
invalid entry.
3. After entering the desired password, press the
carriage return < CR >. The Password Menu
screen appears (Figure D-12).
PRESS: 2 – Save
The confirmation message Command Complete
appears after saving the password to memory.
Customer ID: SITER170 Model: COMSPHERE 3610
Term Pswrd:
1 – Chang T/ C t r l – T = Top Menu
2 – Save U/C t r l – U = Up Menu
PRESS Desired Selection Key
C t r l – x = Disconnect
Figure D-12. Password Menu Screen