Paradyne COMSPHERE
3610, Operator'S Manual

Page: 232 / 310

COMSPHERE 3600 Series Data Service Units
D-8 July 1999 3610-A2-GB91-90
Input Screens
Input screens require data input followed by the
carriage return < CR > key. The options to enter T for top
menu and U for up one menu do not appear and are
disabled for input screens; Ctrl-T and Ctrl-U continue
to be available.
Customer ID (CID)
The Customer ID field appears on the second line of
every screen.
"
Procedure
1. From the Configure Menu Selection screen
( Figure D-4 ), set up or change the Customer ID
as follows:
PRESS: 6 – Term
2. The Async Terminal Menu screen appears with
Term: Enab as the third line. To access the
Customer ID (
Figure D-8 ):
PRESS: 4 – CID
3. From the Customer ID Menu screen
( Figure D-9 ), set up or change the Customer ID
as follows:
PRESS: 1 – Chang
4. The Customer ID input screen appears
( Figure D-10 ). The Customer ID can be up to 8
characters. Valid characters include:
•
Alpha characters A to Z; uppercase only
•
Numeric 0 to 9
•
Characters:
# (pound sign)
- (dash)
. (period)
/ (backslash)
If an invalid character is entered, such as a
lowercase alpha character, the entry is ignored. If
the terminal is set up for sound, the terminal
beeps when an invalid entry is input.
5. After entering the Customer ID (CID), press the
carriage return <CR>. The Customer ID menu
screen reappears (
Figure D-9 ).
PRESS: 2 – Save
After saving the new or modified entry, the
confirmation message Command Complete
appears (
Figure D-11 ). The Customer ID (CID)
will now appear on line 2 of the header on every
screen.
When the confirmation message Command
Complete appears after saving the CID to memory, you
can access other menus.