Paradyne COMSPHERE
3610, Operator'S Manual

Page: 230 / 310

COMSPHERE 3600 Series Data Service Units
D-6 July 1999 3610-A2-GB91-90
Changing External Leads
The External Leads configuration option must be set
before external leads can be displayed or changed. To set
external leads, select Confg, Opts, Activ, Gen, and Ext
Leads. Select ExtLd.
"
Procedure
1. From the Second-Level Menu screen
( Figure D-3 ):
PRESS: 5
–
Ctrl
2. The Control Function Menu selection screen
appears (Figure D-5).
PRESS: 3
–
ExtL
3. The External Leads Menu selection screen
appears ( Figure D-6 ).
PRESS: 2 – Chang
4. The External Leads Input screen appears
( Figure D-7 ). The OutA or OutB field will be
highlighted. To change the value of the bolded
field:
PRESS: 1 – Toggle
The highlighted field will change from high to
low or vice versa. At the DCP, the key is used
instead. To move between the OutA and OutB
fields, use the < Tab > key on the keyboard. At
the DCP, the
or keys are used instead.
5. If the value of either field is changed:
PRESS: 2 – Save
For further details regarding external leads, refer to
the External Leads section of Chapter 4.
Customer ID: SITER818 Model: COMSPHERE 3610
Control Funct:
1 – TxCtl T/ C t r l – T = Top Menu
2 – LEDs U/ C t r l – U = Up Menu
3 – ExtL
PRESS Desired Selection Key
C t r l – x = Disconnect
Figure D-5. Control Function Menu Selection Screen