Panasonic VR2 Series Operating Instructions Manual Download Page 47

Page: 47 / 236

4-26

4-16. Edit files (Basic operation)

While teaching or tracing, file edit operation make possible editing the current working program with operating keys on the
teaching pendant.

Turn OFF the

Robot

motion

OFF

icon lamp to edit files on the window of the teach pendant.

4-16-1. Open a file

To edit a file, you need to open the file you want to edit.

This procedure is necessary only if you want to

edit a file other than the current working program.

Program

Displays a list of all
program files.

Arc start

program files

Displays a list of arc
start program files.
(Welding spec.)

Click

File

Open

Recent files

Displays a list of files
recently used in Teach
mode.

Arc end

program files

Displays a list of arc end
program files.
(Welding spec.)

Jog the dial over the files and select the file you want to
open. Then click the jog dial to open the file.

[Name]

Specify the name of file to open.

[User]

Indicates user name of the specified file.

[Comment]

Indicates comments of the specified file.

[Type]

Program/Arc start/Arc end

Symbols indicate those files are protected.
Please refer to section “File protect” for details.

Attention!

Unless otherwise specified, the explanation is on the premise that the file you want to edit is open.

4-16-2. Display a file on top of the screen

When you open more than one window, u se this function to display the specified file on top. You can edit the file that is
displayed on top.

Click

View

Window

Operation

A list of files currently open on the teach pendant appears.

Move the cursor to the file you would like to display on
top, and then click the

button.

Summary of Contents for VR2 Series













































































































































































































































Search results

Summary of Contents for VR2 Series

Reviews:

Panasonic VR2 Series, Operating Instructions Manual, Page: 47 / 236

Search results

Summary of Contents for VR2 Series

Reviews: