Panasonic VR2 Series Operating Instructions Manual Download Page 42

Page: 42 / 236

4-21

Available functions in Program Test

Function

Availability

Function

Availablity

“WELD/CUT OFF” key

Load factor view

Real time display only

(No overduty error)

Arc retry, Stick release,
Restart overlap

Accumulated time

No count in Program test.

RT and Cube monitor

(No auto restart)

Arc weld information
Weld off input/output

Resume

Running output
Hold status output

Tip change

Arc weld information

Flying start

Home return status output

(Output after executing

GOHOME command)

Override

Home return status output

Back up

X O

: Avaiable

: Not available

4-14-2. Override in the Program test.

Change Override of Program test in the advanced setting to Valid before operation.

Press the F1 key (Override icon) to turn on the Override
in the Program test.

The

lamp is lit and the function keys are changed

to icons for override operations.
Note)
When Overide is set to

Invalid

in the advanced setting,

(Override) icon is not displayed in the F1 key.

(F1)

The override is turned ON or OFF.

(F2)

Changing the adjusting table.

(F3)

Changing the adjusting object.

(F4)

Increasing direction

(F5)

Decreasing direction

Summary of Contents for VR2 Series













































































































































































































































Search results

Summary of Contents for VR2 Series

Reviews:

Panasonic VR2 Series, Operating Instructions Manual, Page: 42 / 236

Search results

Summary of Contents for VR2 Series

Reviews: