13-2
Saves a backup copy of a specified data in a specified file.
Save
Î
Specify a desired “Save to” file name and click the
OK
button.
[All data]
To make a backup copy of all data in the controller.
[Individual data]
To specify data to make a backup copy individually.
(See below table)
Teach program
All teach programs (except ArcStart and
ArcEnd) and folder stored in the controller.
Weld file
(*)
ArcStart and ArcEnd programs for welding.
Function data
All setting data in “I/O”, “Variable”, “Robot”,
“Controller” and “TP”.
Weld settings
(*)
“Arc-weld” setting data.
Product data
“Management tool” setting data (except
origin data).
Î
Origin data
Origin position data (reference position and
origin correction value) of robot and
external axes.
(*)
“Weld file”
and
“Weld settings”
: Not indicated for handling robots.
“System data”
and
“Maintenance data”
:
- Backup copy will be made automatically at any time.
- Load is available only by service engineers.
Loads a specified backup data to a specified file.
The dialog box to specify a file to a desired “Save to” file name (similar to the one for “Save”) appears.
Specify a file name and click OK.
Load
Î
After you specify a desired “Save to” file name and click the
OK
button.
[Same name file]:
[Skip]: Skips the teach file if the file of the same name has
been previously loaded.
[Replace]: Replace data of the teach file if the file of the
same name has been previously loaded unless it is
protected.
[Replace (All files)]: Replace data of the teach file if the file
of the same name has been previously loaded.
Verify
Verifies backup data and the robot memory data after the data have been saved and loaded.
The dialog box to specify a file to a desired “Save to” file name (similar to the one for “Save”) appears.
Specify a file name and click OK.
After you click the
OK
button, it prompts you to confirm if you want to verify the backup copy after copying.