14-9
14-5-5. Auxiliary IN/OUT and Analog I/O
With the Auxiliary IN/OUT unit or Analog I/O unit, it is possible to map correspond the Input/Output to optional
equipment.
With the Auxiliary IN/OUT unit, it is possible to increase the number of Input/Output terminals.
With the Analog I/O unit, it is possible to convert the Input/Output signals to analog signals.
For more information, please refer to the individual manuals.
ID number
The DIP switch number of either expansion I/O unit or analog bard unit (whichever applied).
For details, refer to the manual of the adaptor unit.
(1) Add units
On the
Add option
dialog box,
Specify either [
Expansion IN/OUT
] or [
Analog I/O
] you
want to add and click the
OK
button
1) Setting ID number of “Expansion IN/OUT” unit
Î
Enter the ID number of the last unit after new
unit(s) has added (Last ID number).
The ID number should start from “3” in ascending
order (by 1), that is, if you add 3 units, you should
enter “5”.
Number of unit
1
2
3
4
5
6
7
…
Last ID No. of I/O
3 4 5 6 7 8 9
…
2) Setting ID number of “Analog I/O” unit
Î
Enter the ID number of the last unit after new
unit(s) has added (Last I/D number).
The ID number should start from “31” in
descending order (by 1), that is, if you add 3 units,
you should enter “29”.
Number of unit
1
2
3
4
5
6
7
…
Last ID No. of I/O
31 30 29 28 27 26 25
…