2-4
2-4. User function keys
Some functions are allocated to the 5 user function keys (F1 to F5) located at the bottom of the TP.
Press a user function key to execute the function indicated with the icon. The chage page key is allocated to the F5 key
to display different set (page) of functions F1 to F4 keys.
The context-sensitive functions are available with those User function keys.
Function keys and operations
Operation
F1
F2
F3
F4
F5
Wire/gas check
Coordinate system
change
(Change page)
No file is open
(Robot motion OFF)
(Change page)
Window change
Wire/gas check
Edit mode change
Add command
Change page
Edit
Robot motion OFF
Window change
Cut
Copy
Paste
Change page
Trace ON
Wire/gas check
Edit mode change
Add command
Change page
Teach
Robot motion ON
Trace ON
Weld/No-arc
Interpolation
change
Coordinate system
change
Change page
Trace OFF
Wire/gas check
Edit mode change
Add command
Change page
Trace
Trace OFF
Weld/No-arc
Interpolation
change
Coordinate system
change
Change page
Arc lock
(Note)
Override
(Change page)
Operation
(Change page)
Window change
Edit mode change
Add command
Change page
Offline edit
A file is open.
Window change
Cut
Copy
Paste
Change page
Trace ON/OFF
Cursor (UP)
Cursor (DOWN)
Coordinate system
change
(Change page)
Register teaching
points (robot or
position variable.)
* Shaded items do not appear in the handling specification.
(Note)
Arc lock keys:
Arc lock
ON
Disable arc generation even in the
weld section.
Arc lock OFF
Allows arc generation in the weld
section.
・
While the weld off input is ON, it is not possible to turn OFF the ”Arc
lock” key.
・
The “Resume” function resumes this “Arc lock “ key status (ON/OFF)
before turning off the power when the power is back ON again.
However, as the “weld off input has priority over the resume
function, if this input is set effective, the state of this “Arc lock” key
depends on the state of the input. That is, if the input is ON, the
“Arc lock” key is in ON state, and if the input is OFF, the key is in
OFF state.
The key to
change pages