Panasonic LP-GS Series, Setup & Maintenance Manual

Page: 37 / 190

37
2-3-2 Installation method
• Install the head on a plate with a thickness of 10 mm to 15 mm or more which is made of aluminum or other material with
radiation performance equivalent to that of aluminum.
• For details of installation, refer to “1-5-1 Head” (P.24).
• Fix the head in the following conditions.
Fixing surface Fixing screw Screw insert length Tightening torque
Bottom (laser emission port side) M6 screws at 5 positions 5 mm to 6 mm 3.0 N·m or below
Side (right/left) M6 screws at 4 positions on each side 10 mm to 11 mm 3.0 N·m or below
M6 screw
A
B
M6 screw
A : Screw insert length 5mm to 6mm for
bottom, 10mm to 11mm for sides
B : Plate thi washer thickness
Laser marker head
Installation plate
ワㄐㄕㄊ㄄ㄆ
• Do not insert any screw of length exceeding the specification. Otherwise, the failure of the product may be caused.
„
Example of head installation base
Example dimensions of plate for the head are indicated below.
For plate thickness of 10 mm
Unit: mm
120
φ
20
60
10 5
q
e
r
40
60
120 60
w
φ
94
On the laser marker side
No. Description
q
Head fixing hole (five holes):
φ
6.6 through hole
w
Head positioning pin (2 pins):
φ
4 SUS pin, height 5
e
LP-GS051 / LP-GS051-L: 77.5 mm, LP-GS052: 69.5 mm
r
LP-GS051 / LP-GS051-L: 27 mm, LP-GS052: 24 mm
ンㄆㄇㄆㄓㄆㄏ㄄ㄆ
• As the laser pointer radiate the beam toward the center of the marking field, it is recommended to process the laser
emission port and laser pointer emission port hole to link them so that the laser pointer's beam path does not interfere
with the plate.
ME-LPGS-SM-8