Panasonic LP-400 Series, Operation And Maintenance Manual

Page: 87 / 334

87
3-2-4 Radiate the laser
1. Confirm the radiation position by the guide laser.
1.
Set the marking object, and adjust the work distance.
Set the distance between the laser emission port of the head and the work surface to the appropriate work distance
position for each model.
For the appropriate work distance for each model, refer to “1-3 Specification” (P.36).
Reference
• The work distance can visually be confirmed using “4-6-1 Dual pointer” (P.136).
2.
Press [IMAGE] to check the marking layout.
3.
Press [INDICATE].
4.
Select [Marking Character] and press [START].
The marking content is displayed with the red guide laser.
Adjust the position of the marking object.
5.
The guide laser is stopped by pressing [STOP].
ME-LP400V-OP-6