Panasonic LP-400 Series, Operation And Maintenance Manual

Page: 105 / 334

105
3-3-5 Mark Code Symbol
Sample
Bar Code Type : QR Code Model 2
Version : 0(Auto setting)
Mode : Alphanumerical
Error correction level : H
Module H. : 0.500 mm
Module W. : 0.500 mm
Data : ABCDEFGHIJKLMN12345
The procedures to mark the above QR code at a center point with X coordinate=0 and Y coordinate=0 are described below.
3. Set the pattern.
2. Set the data to be converted into QR code.
Refer to “4. Set the laser condition” (P.86) in “3-2-3 Set the marking data” (P.83).
4. Set the laser setting of QR code.
1. Set QR code condition.
Reference
• For details on QR code marking, refer to “Setting for QR Code and DataMatrix Code” (P.198).
ME-LP400V-OP-6