Panasonic LP-400 Series, Operation And Maintenance Manual

Page: 35 / 334

35
1-2 Product Configuration
This product is a laser marker which is designed to mark and process the object by radiating a laser beam to the target.
This product consists mainly of the following units.
LP-V/LP-W Series LP-400 Series
q
w y
t
e
q
w
r
y
t
e
No. Name Description
q
Head It is the unit that radiates the laser beam. The optical components
and the scanner are loaded inside.
w
Controller It is the unit that stores the setting data and controls the operation.
The main power supply and connection interface with external
devices are loaded.
e
Head Power Cable (Attached accessory)
Head Control Cable (Attached accessory) Cables to connect the head and controller.
r
Fiber cable (only LP-V/LP-W series) Cable to deliver the laser beam from controller to head.
t
Controller power cable (Attached accessory) Cable to supply AC power.
y
Touch panel console (Optional item)
or
Commercially available monitor and mouse
(Not included in this product.) Connect the touch panel console or monitor and mouse to the
laser marker to set the marking data and other parameters. This
display can be used also as a monitor during the operation.
It is also possible to configure the marking data with PC by
installing the attached software “Laser Marker Driver & Utility”.
⿎
Optional items
The following optional items (sold separately) are available for this product.
To purchase them and for the detailed information, please contact our sales office.
Optional Items Model
Touch Panel Console LP-ADP40
Air Filter (for replacement) LP-400 Series : LP-AFT20
LP-V Series /LP-W Series : LP-AFT21
Protection Glass of Laser Emission Port
(for replacement) *1 LP-V10(U) Type *2 : LP-ACV10 or LP-ACV20 or LP-ACV60
LP-V15(U) Type *2 : LP-ACV15 or LP-ACV25
LP-W052(U) Type : LP-ACV12
Head Power Cable (for replacement) LP-ACP20-5
Head Control Cable (for replacement) LP-ACS20-5
*1 : The protection glass of the laser emission port is available only for LP-V/LP-W series.
*2 : Depending on the manufactured period of the laser marker, the parts model of the protection glass is vary. Check the
serial No. of the laser marker and contact our sales office.
ME-LP400V-OP-6