Panasonic LP-400 Series, Operation And Maintenance Manual

Page: 149 / 334

149
⿎ Input Method of Japanese, Katakana
1.
Press [KANA•KANJI].
2.
Press [
カナ
], Then press the character to be input, and
press [CONFIRM].
The character is input by pressing [SET].
1
2
3
⿎
Input Method of Japanese, Hiragana and Kanji
1.
Press [KANA•KANJI].
2.
Press [ かな ], and select the desired character from the
table to enter it.
When the desired character is Hiragana, press [CONFIRM].
3.
When the desired character is Kanji, press [CONVER.]
(CONVERT) until the desired Kanji is appeared, and
press [CONFIRM].
The character is input by pressing [SET].
Reference
• For marking kanji, the setting of the JIS font is required. Refer to “4-15-4 Font File” (P.244).
• There are some characters that are impossible to be converted into Kanji. Check the “Character Code Table” in External
Control Manual.
1
2
3
ME-LP400V-OP-6