manualshive.com logo in svg

Panasonic LP-400 Series, Operation And Maintenance Manual

The Panasonic LP-400 Series is a high-performance electronic device designed to streamline your operations effortlessly. Ensure optimal efficiency and longevity with our comprehensive Operation and Maintenance Manual. This user-friendly manual is available for free download from our website, allowing you to access it conveniently at any time.

Share
Download
background image

175

 

⿎

Step & Repeat

This “Step & Repeat” applies for marking the same content repeatedly. It is usable for marking object laid side by side such 
a palletized object.

Reference

•  The Step & Repeat function cannot be combined with the marking on flying object.

Description

1 

Step and Repeat :
Check this box to validate the Step & Repeat marking function.

2 

Number of Row :

3 

Number of Column :
The number of rows / columns where the pattern which has been set is to be marked.

Setting Range

1 to 100

Reference

• 

The pattern is the unit of data created in Step & Repeat.

• 

Max. number of settable patterns is 1000.

4 

Row Step :

5 

Column Step :
The pitch between patterns in row / column direction.

Setting Range

0.000 to 90.000 mm

(LP-V10)

0.000 to 110.000 mm

(LP-430 / LP-420 / LP-410)

0.000 to 160.000 mm

(LP-435 / LP-425 / LP-V15)

0.000 to 55.000 mm

(LP-431 / LP-421 / LP-411 / LP-W052)

1

2

6

3

4
5

7

9

10

8

ME-LP400V-OP-6

Summary of Contents for LP-400 Series















































































































































































































































































































































Reviews:

No comments

Related manuals for LP-400 Series

GMC DEC007EN Manual preview
DEC007EN
Brand: GMC Pages: 40
Red Technology MAGIC-2 Instruction Manual preview
MAGIC-2
Brand: Red Technology Pages: 37

Brands by name

Popular brands

Load more brands