Panasonic LP-400 Series, Operation And Maintenance Manual

Page: 211 / 334

211
⿎ Common
1
2
3
4
5
Common Setting Item
1 Proc. Cond. No. (Processing Condition No.) :
Specifies up to 8 processing condition per one registered file.
Setting Range 0 to 7
2 X/Y Offset :
Shifts the marking position to the X or Y direction.
Setting Range
-45.000 to +45.000 mm (LP-V10)
-55.000 to +55.000 mm (LP-430 / LP-420 / LP-410)
-80.000 to +80.000 mm (LP-435 / LP-425 / LP-V15)
-27.500 to +27.500 mm (LP-431 / LP-421 / LP-411 / LP-W052)
3 Rotation Angle :
Rotates the object to the rotation direction around the origin.
Setting Range -180.00 to +180.00 degree
4 Laser Power Correction :
Scan Speed Correction :
Laser Pulse Cycle Correction (Only LP-V series) :
Correction of the processing elements in the selected processing condition No. for the laser power / scan speed /
laser pulse cycle set at laser setting.
If the correction rate is set to 0%, the marking image is displayed in gray and marking is not executed.
Setting Range of Laser Power Correction 0 to 200%
Setting Range of Scan Speed Correction 5 to 500%
Setting Range of Laser Pulse Cycle Correction 50 to 200%
5 Area No. :
Displayed when marking on-the-fly is set in “Trigger setting”.
It indicates the order of the marking field for the concatenated marking to flying object.
Setting Range 0 to 15
ME-LP400V-OP-6