manualshive.com logo in svg

Panasonic LP-400 Series, Operation And Maintenance Manual

The Panasonic LP-400 Series is a high-performance electronic device designed to streamline your operations effortlessly. Ensure optimal efficiency and longevity with our comprehensive Operation and Maintenance Manual. This user-friendly manual is available for free download from our website, allowing you to access it conveniently at any time.

Share
Download
background image

267

4-16-5  Output Simulation

With the output simulation you can check the output signals of the laser marker without an actual operation.

Use this function to confirm the operation of the external devices connected with the laser marker.

1

2

3

4

Item

Description

1 

I/O Terminal

2 

I/O Connector

: In the table, the status “0” indicates output OFF and “1” indicates output ON. 

During the output simulation, the status display of the terminal changes to yellow.

3 

Output ON/OFF

: Click the output terminal name to simulate, then the output status of the laser marker 

changes.

4 

STOP OUTPUT

: Terminates the simulation mode and reset the ON/OFF status of the output signals.

This button appears when output simulation is started.
During the output simulation, other operation and settings are disabled.

Reference

• 

For the name of each signal, refer to “External Control Manual”.

ME-LP400V-OP-6

Summary of Contents for LP-400 Series















































































































































































































































































































































Reviews:

No comments

Related manuals for LP-400 Series

ALDI WORKZONE 10283 User Manual preview
WORKZONE 10283
Brand: ALDI Pages: 20

Brands by name

Popular brands

Load more brands