Panasonic LP-400 Series, Operation And Maintenance Manual

Page: 279 / 334

279
Air filter
Air filters are placed in the air-cooling areas each of the head and the controller.
⿎
Effect from deterioration
The air filter soiled with dust may reduce the cooling effect of the air-cooling fan. This may cause the marking performance
to degrade, or failure of the laser marker.
⿎ Replacement interval
• There is a broken part, or contamination that cannot be removed by cleaning.
⿎ Models of replacement parts
For details of purchasing air filters, please contact our sales agency.
Applicable laser marker Model Filter type and quantity
LP-400 series LP-AFT20
• For the head: 2 large-size filters
• For the controller: 1 middle-size filter and 1 small-size filter
LP-V series
LP-W series
LP-AFT21
• For the head: 1 small-size filter
• For the controller: 1 large-size filter and 1 middle-size filter
⿎
Steps for cleaning (Daily maintenance) and replacement of air filter
Clean air filters regularly according to the usage environment.
1.
Turn OFF the key switch of the controller, and disconnect the controller power cable.
2.
Loosen the screws of the filter cover panel and remove the panel and filter.
Be aware of keeping the washers attached behind the panel.
Filter cover panel
Controller: 2 screws
Screw
Washer
Filter
Filter cover panel
Screw
Washer
Filter
LP-400 Series:
2 screws on the head part
1 screw on the head part
Filter cover panel
Screw
Washer
Filter
LP-V/LP-W Series:
ME-LP400V-OP-6