Panasonic LP-400 Series, Operation And Maintenance Manual

Page: 101 / 334

101
3-3-4 Mark Counter
Sample
0001 0002 0003
…
0998 0999 1000 0001 0002
Initial value (Init) : 1
End value (End) : 1000
Step : 1
Counter source (Source) : Trigger signal
Displayed number of digits (Figure) : 4
Display leading zeros (Zero Indi.)
: Enable
Type of base number : Base-10 (Decimal) number system
Set the counters shown above.
2. Input the function character of the counter.
1. Set the counter.
Refer to “3. Set the marking layout” (P.85) and “4. Set the laser condition” (P.86) in “3-2-3 Set the marking
data” (P.83).
3. Set the conditions of the function character of the counter and laser.
Reference
• For details on the counter function, refer to“4-9-2 Counter” (P.164).
ME-LP400V-OP-6