Panasonic LP-400 Series, Operation And Maintenance Manual

Page: 129 / 334

129
4-4 Operator Adjustment Screen
The operator adjustment screen is the screen that the operator can change or set only the permitted items.
Set the selecting item of the marking condition to be adjusted by operator following to the procedure described in “4-16-1
Display Setting (Environment 1)” (P.253).
4-4-1 Operator Adjusting Screen
1
7
2
3 4
6
8
9
Description
1 Image Display:
Image-displays the marking content set previously.
2 Magnification:
Sets the magnification ratio of the image display.
3 Image Display Zoom-in/Zoom-out :
Zooms in/out image display. The image can be zoomed in and out by 18 steps.
4 Center of Image Display:
Set the origin center to image display position.
5 Image Display Position:
Indicates where the current image is in the marking field.
6 Shift Display Position:
Shifts image display position up and down, left and right. Pressing arrow shifts the image display position.
7 Area No.:
Displayed when marking on-the-fly is set in “Trigger setting”. It indicates the order of the marking field for the
concatenated marking to flying object.
Press [+] [-] for switching Area No., and then the image corresponding to Area No. is displayed.
8 BACK:
Returns to operation screen.
9 Changeable Items:
The items that are permitted in “4-16-1 Display Setting (Environment 1)” (P.253) are displayed.
For the setting items, refer to “4-4-2 Operator Adjustable Items” (P.130).
5
ME-LP400V-OP-6