Panasonic LP-400 Series, Operation And Maintenance Manual

Page: 198 / 334

198
⿎ Setting for QR Code and DataMatrix Code
Description
1 Version (QR code only):
Specifies the symbol size of QR code and micro QR code.
When “0” is selected, the size is specified to be the minimum automatically. In this case, the symbol size may
change depending on the input code data.
Refer to “QR Code Version and Data Capacity” (P.319) for detail.
Setting Range
When QR code model 1 is set : 0 to 14
When QR code model 2 is set : 0 to 22
When micro QR code is set : 0 to 4
2 Symbol (DataMatrix code only):
Specifies the symbol size (module unit) of DataMatrix code. Select “Auto” or “Manual”. When “Auto” is selected, the
size is specified to be the minimum.
Refer to “Symbol Size and Data Capacity” (P.322) for detail.
Square : 10×10, 12×12, 14×14, 16×16, 18×18, 20×20, 22×22, 24×24, 26×26, 32×32, 36×36, 40×40,
44×44, 48×48, 52×52, 64×64, 72×72, 80×80, 88×88
Rectangle : 8×18, 8×32, 12×26, 12×36, 16×36, 16×48
3 Mode :
Input mode for the code data. Depending on the mode, available characters vary. Refer to “Code Type and Code
Data” (P.190).
• For QR code, select the mode from “Number”, “Alpha”, “Binary” or “Kanji”.
• For DataMatrix code, select the mode from “ASCII” or “Kanji”.
• For GS1 DataMatrix code, data input mode is fixed to binary mode.
4 Err. Cor. (Error Correction) (QR code only):
Specifies the error correction level of QR code.
Select from “L (7%)”, “M (15%)”, “Q (25%)” or “H (30%)”.
2
3
6
1
3
4
5
5
QR Code DataMatrix Code
6
ME-LP400V-OP-6