Panasonic KX-TVS125, Installation Manual

Page: 351 / 476

B7 SYSTEM ADMINISTRATION—HARDWARE SETTINGS
Installation Manual 351
Inband Signaling Parameters
Use these parameters if the PBX sends touchtones to the VPS to indicate the state of a call
(busy, answered, disconnected, etc.). The integration mode must be set to "Inband". If PBX
type is set to a KX-T series telephone system, the Inband Signaling parameters will
automatically default to the proper codes.
The following parameters can be programmed using "0-9", " ", "#", and "A-D".
Release
Sequence
for Call
Waiting
(F)
The VPS performs this sequence to release call waiting.
To access the menu for Inband Signaling Parameters, follow the menu path as
shown:
System Administration Top Menu-1-6-3-2
Table B-46
Parameter Value Range
(Default)
Description/Function
Ringback
(1)
Indicates "Ringback Tone". Sent to the VPS when the
extension dialed is ringing.
Busy
(2)
Indicates "Busy Tone". Sent to the VPS when the
extension dialed is busy.
Reorder
(3)
Indicates "Reorder Tone". Sent to the VPS when an
invalid extension number is dialed or when inadvertently
connected to another VPS.
DND
(4)
Indicates "Do Not Disturb Tone". Sent to the VPS if the
dialed extension has the Do Not Disturb feature enabled.
Answer
(5)
Sent to the VPS when the called extension answers the
call.
Forward to
VM Ringing
(6)
Sent to the VPS if the called extension is forwarded to a
voice mail port and that voice mail port is available to
accept the call.
Forward to
VM Busy
(7)
Sent to the VPS if the called extension is forwarded to a
voice mail port and that voice mail port is not available to
accept the call.
Forward to
Other
Extension
(8)
Sent to the VPS if the called extension is forwarded to
another, non-Voice Mail extension.
Table B-45
Parameter Value Range
(Default)
Description/Function