Panasonic KX-TVS125, Installation Manual, Page: 350 / 476

B7 SYSTEM ADMINISTRATION—HARDWARE SETTINGS
350 Installation Manual
S: Silence Detection
T: Dial Tone Detection
W: Wait for 1 s
X: Extension dialing
A: Answer
1-9, 0, , #: Dial Codes
Table B-45
Parameter Value Range
(Default)
Description/Function
Operator
Transfer
Sequence
(FXA)
The VPS performs this sequence when transferring calls
to the operator’s extension.
Extension
Transfer
Sequence
(FXA)
The VPS performs this sequence when transferring calls
to any extension except the operator’s.
Alternate
Extension
Transfer
Sequence
(FXA)
The VPS performs this sequence when transferring calls
to extensions in the Alternate Extension Group.
Reconnect
Sequence on
Busy
(F)
If an extension is busy, this sequence allows the VPS to
reconnect to the caller.
Reconnect
Sequence on
No Answer
(F)
If the extension does not answer, this sequence allows the
VPS to reconnect with the caller.
Reconnect
Sequence on
Refuse Call
(F)
The VPS performs this sequence to retrieve a call placed
on hold after the extension (in the Call Screening mode)
has refused to accept it.
Light-On
Sequence
for Message
Waiting
Lamp
(None)
This is the dialing sequence that the VPS must perform to
enable the Message Waiting Lamp at an extension.
Light-Off
Sequence
for Message
Waiting
Lamp
(None)
This is the dialing sequence that the VPS must perform to
disable the Message Waiting Lamp at an extension.
Call Waiting
Sequence
(1)
The VPS carries out this sequence when performing call
waiting if the extension being called is busy.