Panasonic KX-TVS125, Installation Manual

Page: 206 / 476

7.2 UTILITY COMMANDS
206 Installation Manual
3.
To create a password or change an existing password:
a)
Type [1] or [2]
Note
When you press [2] to change the System Reset/Clear password, you should type
the current (OLD) password before entering a new one.
b)
Type the password.
c)
Type the password again for verification.
4.
To clear a password:
a)
Type [1] or [2] .
b)
Press ENTER. Do not type a password on this screen.
c)
Press ENTER. Do not type a password on this screen.
Note
The password entered on the screen will not appear. The VPS does not distinguish
the capital letter from the small letter.
7.2.4 Set Time (TIME)
Use the TIME command to set the system date and time. A number of system functions
require that the system time and date be set correctly. These functions include message
waiting notification, external message delivery, call-retries-after initial-failure-to-connect, and
automatic deletion of messages.
Time Synchronization: If you have DPT Integration between the VPS and your PBX (latest
software version), the date and time are automatically sent from the PBX to the VPS whenever
the PBX sets the date and time. Also, this transfer occurs whenever DPT Integration is
established.
1.
Type TIME , then Press RETURN.
2.
Type the current time.
Maximum 10 characters
NEW PASSWORD : =
VERIFICATION: =
Maximum 10 characters
NEW PASSWORD : =
VERIFICATION : =
$ TIME
Current time is 12:34, PM
Enter new time (HH:MM, AM/PM) : =
Current date is MON JAN-1-2001
Enter new date (MM-DD-YY) : =