Panasonic KX-TVS125, Installation Manual

Page: 120 / 476

4.4 CONNECTING THE VPS WITH THE PANASONIC KX-TD816, KX-TD1232, KX-TA1232 AND KX-TD308
120 Installation Manual
From the SYS-PGM NO ? screen:
a)
Enter [116].
b)
Press the NEXT button (SP-PHONE).
c)
Enter the system number ( [0] or [1] , master/slave). The system displays the ROM
version and the date it was created.
This version must be P231U or higher for DPT Integration to be utilized (both
systems if system connection is used).
2.
Set the date and time using System Program [000] .
3.
Set PBX extension numbering using System Program [003] .
4.
Assign the Voice Mail Port . This program tells the PBX which jack will be connected to
the VPS. This allows the PBX to send the proper DPT Integration information to those
ports.
Notes
• You can assign a maximum of 6 jacks (12 ports) with the KX-TD1232.
(6 jacks [12 ports] with the KX-TD816; 4 jacks [8 ports] with the KX-TA1232.)
• If you are configuring a 2-cabinet system, all Voice Mail Ports should be assigned to
either the Master or Slave System.
From the SYS-PGM NO ? screen:
a)
Enter [117].
b)
Press the NEXT button (SP-PHONE).
Screen output: M: # # # #
c)
Enter the jack number (02-64) of the port you will use for the Voice Mail.
d)
Press STORE.
e)
Press END (HOLD) when finished.
5.
Skip this step unless setting flexible numbering.
System Program [118] (Voice Mail Extension Number Assignment) is automatically
set. This program allows you to assign an extension number to each Voice Mail port.
Since a jack connected to the VPS provides 2 extensions, this enables you to assign
extension numbers to each port. You can assign any extension number that is not
already assigned to another port. To reach the VPS, users dial these extension
numbers. It is not necessary to change the default programming for the extensions
165 and 166.
From the SYS-PGM NO ? screen:
a)
Enter [118] .
b)
Press the NEXT button (SP-PHONE).
Screen output: VM NO?
Conditions: Jack 01 cannot be used as a Voice Mail port. A jack
programmed as a Manager Extension (System
Program [006]) cannot be used in this program.