Panasonic KX-TVS125, Installation Manual

Page: 151 / 476

4.6 DPT INTEGRATION FEATURES AND SETUP PROCEDURES FOR THE PANASONIC KX-TDA/KX-TAW
Installation Manual 151
4.6.10 One-Touch Two-Way Transfer (One-Touch TWT) Button
Assignment
For the One-Touch Two-Way Transfer feature to work at an extension, the extension must have
a One-Touch TWT button on it. This button must either be a DSS/BLF or CO button with a
lamp. Follow the procedure below to assign a One-Touch TWT button on an extension. (This
is station level programming and should be done at each individual phone.) PC programming
is also available (see 4.6.12 Button Assignment via PC Programming).
1.
Enter Station (Personal) Programming:
With the phone on-hook,
Press the PROGRAM button.
(Display changes to PT-PGM Mode.)
2.
Press the desired Flexible ( CO or DSS/BLF ) button you want to assign as the One-Touch
TWT button.
3.
Press [91] .
Screen output: 2WAY-Xfr-
4.
Enter a Voice Mail floating extension number.
Screen output: 2WAY-Xfr- _ _ _
(_ _ _ = The Voice Mail floating extension number you entered)
.
5.
Press [#] .
6.
Enter a Transferred extension number.
Screen output: 2WAY-Xfr-_ _ _#_ _ _
(#_ _ _ = The Transferred extension number you entered)
.
7.
Press STORE .
8.
Press the PROGRAM button or lift the handset to exit the Station (Personal)
Programming mode.
9.
Repeat these steps for each telephone.
Conditions: This button must be a flexible (CO or DSS/BLF)
button to be programmed as a One-Touch TWT
button. When all Voice Mail ports are busy and this
key is pressed, the user will hear reorder tone.