Panasonic KX-TVS125, Installation Manual

Page: 370 / 476

C3 SETTING COS (CLASS OF SERVICE) PARAMETERS
370 Installation Manual
Subscriber Tutorial
Message Notification
External Message Delivery
28. a)
The current setting plays. Press [1] to change the setting (enable or disable).
b)
Confirm the entry is correct and Press [2] to accept it.
29. a)
The current setting plays. Press [1] to change the setting (enable or disable).
If the Message Notification is enabled, go to Step 29b below.
b)
Press [1], [2], [3], [4], or [5] to choose the desired Beeper Callback Number
Entry Mode.
• [1] Caller Select Mode
• [2] Without message mode
• [3] Before message recording mode
• [4] After message recording mode
• [5] Disable All Entry Mode (Caller cannot access beeper)
c)
Confirm the entry is correct and Press [6] to accept it.
d)
The current setting of MWL Notification for Unreceived Message plays. Press
[1] to change the setting (enable or disable).
e)
Confirm the entry is correct and Press [2] to accept it.
f)
The current setting of Device Notification for Unreceived Message plays.
Press [1] to change the setting (enable or disable).
g)
Confirm the entry is correct and Press [2] to accept it. Return to Step 29a
above.
30. a)
The current setting plays. Press [1] to change the setting (enable or disable).
If the External Message Delivery is enabled, set the prompt mode for
receiving External Delivery Messages (go to Step 30b below).
b)
The current prompt mode plays. Press [1], [2], [3], or [4] to choose the
desired mode.
• [1] System Prompt
• [2] User 1 Prompt
• [3] User 2 Prompt
• [4] Selective Prompt
c)
Confirm the entry is correct and Press [5] to accept it. Return to Step 30a
above.