manualshive.com logo in svg

Panasonic KX-TVS125, Installation Manual

Share
Download
Panasonic KX-TVS125 Installation Manual Download Page 381

C9 DELIVERING MESSAGES

Installation Manual

381

C9

DELIVERING MESSAGES

The System Manager can deliver the same message to all or specified subscribers’ 
mailboxes. When delivering a message to specified mailboxes, he can check the distribution 
status of each message.

Delivering Messages to All Mailboxes (Broadcasting Messages)

The Broadcasting Messages feature allows the System Manager to deliver the same message 
to all subscribers at the same time. The message to broadcast is recorded in the System 
Manager’s mailbox. This feature is useful when informing subscribers about the current VPS 
status such as remaining hard disk capacity, requesting that unnecessary messages be 
erased, etc.

1.

Log in

 the Main Menu.

2.

Press [2]

 to deliver a message.

3.

Press [1]

 to record a broadcast message.

4.

Record a broadcast message and 

Press [1]

.

5.

Press [2]

 to accept the message recorded.

Delivering Messages to Specified Mailboxes

Use this feature to deliver the same message to one or more subscriber mailboxes by 
specifying their numbers.

1.

Log in

 the Main Menu.

2.

Press [2]

 to deliver a message.

3.

Press [2]

 to deliver a message.

4.

Type

 the 

mailbox number

 of the intended recipient.

Note

Enter by name by Pressing [#] [1] first.
Use a System Group Distribution List by specifying its number.

5.

Press [2]

 to accept the number if it is correct.

Note

Press [2] to add mailbox numbers. Press [3] to review the mailing list. Press [ ] to cancel 
message transfer.

Summary of Contents for KX-TVS125





























































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands