manualshive.com logo in svg

Panasonic KX-TVS125, Installation Manual, Page: 389 / 476

Share
Download
Panasonic KX-TVS125 Installation Manual Download Page 389

D2 MANAGING THE GENERAL DELIVERY MAILBOX

Installation Manual

389

D2

MANAGING THE GENERAL DELIVERY 
MAILBOX

One of the Message Manager’s functions is to check the General Delivery Mailbox for 
messages and transfer them to the appropriate mailbox or mailboxes (System Group 
Distribution Lists may be used). This can be done at any time using the telephone.

Listening to Messages

The Message Manager can monitor the status of the General Delivery Mailbox through his 
mailbox. He can listen to the messages stored in the General Delivery Mailbox and, if 
necessary, transfer them to their intended recipients.

1.

Log in

 the Main Menu.

2.

The VPS plays the number of new messages. 

Press [1]

 to listen to the messages.

3.

The VPS plays each message, identifying the sender and indicating when the message 
was recorded. 

Press [0]

 to listen to the entire menu.

•

[1] Repeat this Message

•

[1] [1] Replay the Previous Message

•

[2] Play the Next Message

•

[3] ([1]) Erase this Message

•

[4] Reply

•

[5] Rewind

•

[6] Fast Forward

•

[7] Transfer

•

[8] Message Scan

•

[9] Save this Message as New

Transferring Messages

Messages left in the General Delivery Mailbox must be transferred to their intended recipients 
with voice comments attached when necessary. When a message has been transferred, we 
recommend that the original be deleted from the General Delivery Mailbox.

1.

Log in

 the Main Menu.

2.

Press [1]

 to transfer messages from the General Delivery Mailbox.

3.

The VPS plays the first (next/last) message. 

Press [7]

 to transfer the message.

4.

Type

 the 

destination mailbox number

.

Summary of Contents for KX-TVS125





























































































































































































































































































































































































































































































Reviews:

No comments