Panasonic KX-NS1000, Installation Manual

Page: 254 / 416

KX-NT265 (Software version 2.00 or later only)
IP Address* 1
Subnet Mask Address*
2
Default Gateway Address* 3
To set the IP address of the IP-PT
To set the subnet mask address
To set the default gateway address
To enter the IP address of the PBX
To start programming
Supply power to the IP-PT.
Press PROGRAM
while "Searching" is displayed.
PROG.
Press VOLUME to
select "Network".
VOL
Press SP-PHONE. Press VOLUME to
select "DHCP (Disable)".
VOL
Press SP-PHONE
twice.
Press SP-PHONE.
Press VOLUME to
select "Subnet Mask".
VOL
Press SP-PHONE. Press SP-PHONE.
Press VOLUME to
select "Default GW".
VOL
Press SP-PHONE. Press SP-PHONE.
Press HOLD
twice to return
to the Menu screen.
HOLD
Press VOLUME
to select "PBX".
VOL
Press SP-PHONE
twice.
Press
SP-PHONE.
To the VLAN settings
The IP-PT will reboot
and can then be
registered to the PBX.
To end programming
To set VLAN parameters
OR
Press STORE.
PBX IP
Address
Press HOLD
to return to the
Menu screen.
HOLD
*1 Valid IP address range: "1.0.0.0" to "223.255.255.255"
*2
Valid subnet mask address range: "0–255.0–255.0–255.0–255" (except "0.0.0.0" and "255.255.255.255")
*3
Valid IP address range: "1.0.0.0" to "223.255.255.255"
254 Installation Manual
5.8.1 Assigning IP Addressing Information