Panasonic KX-NS1000, Installation Manual

Page: 236 / 416

Confirm that all V-IPGW16 cards are set to OUS.
Note
When a V-IPGW16 card is installed, 8 ports are
available for the card.
2. a.
Click Setup
®
PBX Configuration
®
CO &
Incoming Call .
b.
Click CO Line Settings .
c.
Type the CO Name and assign an unused Trunk
Group Number to be used for all IP trunks.
d.
Click OK .
3. Note
Before changing Numbering Plan settings, when a
V-SIPEXT32 card or V-UTEXT32 card is installed,
change the status of the card(s) to OUS.
a.
Click Setup
®
PBX Configuration
®
System .
b.
Click Numbering Plan .
c.
Click Main .
d.
Click the Other PBX Extension tab.
e.
In the Dial (3 digits) cell, type a starting digit of
destination extension.
f.
Click OK .
4. a.
Click Setup
®
PBX Configuration
®
Private
Network .
b.
Click TIE Table .
c.
In the Leading Number cell, type the starting digit
of destination extension.
d.
Click OK .
236 Installation Manual
5.6.3 Programming the Network Settings