Panasonic KX-NS1000, Installation Manual

Page: 244 / 416

•
Not using a DHCP server (DHCP Server feature or an external DHCP server) when the IP-PT is on
the same LAN as the PBX
Only the PBX’s IP address can be assigned automatically to the IP-PT in the process of being registered
to the PBX. For details about registering the IP-PT, refer to "5.9.1 Registering IP Telephones".
Follow the procedure below to assign the IP address of the IP-PT, the subnet mask address, and the default
gateway address manually.
If you need to set VLAN parameters, follow the procedure described in "5.8.2 Setting VLAN
Parameters" after assigning the IP addresses, without ending programming.
KX-NT300 series (except KX-NT321) and KX-NT500 series (except KX-NT551)
Select "Network". ENTER Select "Disable"
for DHCP setting.
ENTER
IP Address* 1
ENTER
To set the IP address of the IP-PT
Select "Default Gateway". ENTER
Default Gateway Address*
3
ENTER
To set the default gateway address (if required)
To set the subnet mask address
Select "Subnet Mask". ENTER
Subnet Mask Address* 2
ENTER
Select "IP Address".
To start programming
Press "SETUP" when it is displayed.
SETUP
Supply power to the IP-PT.
Return to the
Menu screen.
To enter the IP address of the Secondary PBX
(optional for KX-NT300 series [Software version 2.00 or later only] and
KX-NT500 series [Software version 1.00 or later only])
PBX IP Address
ENTER ENTER
Select "PBX". Select "PBX IP
Address".
ENTER ENTER Select "Secondary
PBX".
Continued on next page
244 Installation Manual
5.8.1 Assigning IP Addressing Information