manualshive.com logo in svg

Panasonic KX-NS1000, Installation Manual, Page: 203 / 416

Share
Download
Panasonic KX-NS1000 Installation Manual Download Page 203

Using Web Maintenance Console in Off-line Mode

You can connect a PC to the PBX to programme the PBX using Web Maintenance Console (On-line mode),
or you can programme the PBX without connecting the PC to the PBX (Off-line mode).
Off-line mode programming is performed using the Off-line version of Web Maintenance Console, which you
install on your PC. The changes made during Off-line mode are saved as local data on the PC, and then later
uploaded to the PBX.
The following procedures outline how to install the Web Maintenance Console for Off-line mode programming.

Installation

Note

•

Be sure to install the latest version of Off-line WEB-Maintenance Console.

•

Before beginning the installation of Off-line Web Maintenance Console, the following software must be
installed on the PC:

–

Microsoft .NET Framework 2.0

–

Microsoft .NET Framework 4

This software can be downloaded from Microsoft’s online Download Centre.

•

To install or uninstall the software on a PC running Windows Vista Business, Windows 7, Windows 8,
Windows 8 Professional, Windows 8.1, or Windows 8.1 Professional, you must be logged in as a user
in the "Administrators" group.

1.

Copy the Off-line WEB-Maintenance Console setup file to your PC.

2.

Double-click the setup file to run the installer.

3.

Follow the on-screen instructions provided by the installation wizard.

Note

For information about programming the PBX in Off-line mode, refer to the PC Programming Manual.

Converting KX-TDE, KX-NCP or KX-TDA100D System Data for Use with the

KX-NS1000

You can use a tool to convert an existing PBX's system data (DxSYS

*1

) for use in a KX-NS1000 Master unit or

Slave unit, and then use that data as the system data (DCSYS) for the KX-NS1000. The following options are
available as the conversion destination (Master unit or Slave unit) for the data.

Conversion

type

System data necessary for conversion

System configuration for

post-conversion DCSYS file

Master data
converter

System data from an existing PBX 
(DxSYS

*1

)

Master unit, Stand alone

Slave data
converter

System data from an existing PBX 
(DxSYS

*1

) that will be added as a slave unit.

Master unit with Slave units

System data from a Master unit to be used
as the base.

The following figures illustrate the system data conversion process for the conversion types.

Installation Manual

203

5.3 Starting Web Maintenance Console

Summary of Contents for KX-NS1000

































































































































































































































































































































































































































Reviews:

No comments