manualshive.com logo in svg

Panasonic KX-NS1000, Installation Manual, Page: 186 / 416

Share
Download
Panasonic KX-NS1000 Installation Manual Download Page 186

•

Maximum current: 500 mA

For details about backing up and restoring using a USB memory device, refer to "6.1.1  Tool—System Data
Backup—Backup to USB" in the PC Programming Manual.

Note

Do not use a USB hub when connecting a USB memory device to the PBX.

Using a UPS

A UPS is a device that supplies power for several minutes to a connected device when a power failure occurs.
For details about connecting a UPS to the PBX, refer to "Connecting an Uninterruptible Power Supply
(UPS)".

Note

When connecting a UPS, use only the USB cable included with the UPS, and do not use a USB hub.

186

Installation Manual

4.10 Connection of Peripherals

Summary of Contents for KX-NS1000

































































































































































































































































































































































































































Reviews:

No comments