Panasonic KX-NS1000, Installation Manual

Page: 147 / 416

•
The maximum length of the CAT 5/CAT 5e cables to be connected to the mother board is 100 m.
•
For installing and removing the Storage Memory Card, refer to "4.2.6 Installing/Removing the Storage
Memory Card".
•
For details about Virtual Slots, refer to "2.3.3 System Capacity".
•
If the preinstalled activation keys on the mother board are not enough for the desired configuration,
you need to purchase activation key codes. For details about the activation keys, refer to
"3.1 Information about the Activation Keys".
•
For details about connecting to a LAN, refer to "4.11 LAN Connection".
•
For details about connecting peripherals, refer to "4.10 Connection of Peripherals".
•
For details about System Mode Switch, refer to "4.13 Starting the KX-NS1000".
WARNING
A lithium battery is used in the mother board. There is a risk of explosion if the battery is replaced
with the incorrect type. Dispose of used batteries according to the manufacturer’s instructions.
Pin Assignments
MNT Port/LAN Port/WAN Port (10BASE-T/100BASE-TX)
No. Signal Name Input (I)/Output (O) Function
8 1
1 TPO+ O Transmit data+
2 TPO- O Transmit data-
3 TPI+ I Receive data+
4-5 Reserved – –
6 TPI- I Receive data-
7-8 Reserved – –
MNT Port/LAN Port/WAN Port (1000BASE-T)
No. Signal Name
Input (I)/
Output (O)
Function
8 1
1 TRD0 (+) I/O Transmit and receive data 0 (+)
2 TRD0 (-) I/O Transmit and receive data 0 (-)
3 TRD1 (+) I/O Transmit and receive data 1 (+)
4 TRD2 (+) I/O Transmit and receive data 2 (+)
5 TRD2 (-) I/O Transmit and receive data 2 (-)
6 TRD1 (-) I/O Transmit and receive data 1 (-)
7 TRD3 (+) I/O Transmit and receive data 3 (+)
8 TRD3 (-) I/O Transmit and receive data 3 (-)
Installation Manual 147
4.3.1 Mother Board