Panasonic KX-NS1000, Installation Manual

Page: 202 / 416

2.
Access Web Maintenance Console:
MNT Port Connection:
Launch your Web browser and in the address bar, enter one of the following addresses exactly as shown:
–
223.0.0.1
or
–
http://kx-ns1000.
Note
•
If entering " http://kx-ns1000. ", be sure to include the period at the end as shown.
•
The default subnet mask for the MNT port is 255.255.255.0.
•
If connecting using 223.0.0.1 takes a long time, configure a static IP address for the PC.
LAN or VPN Connection:
Launch your Web browser and input the IP address of the PBX followed by the Web Maintenance Console
port number into the address bar. The input method will differ according to the PC’s connection to the PBX.
The default IP address for the LAN port of the PBX is 192.168.0.101, and the default Web Maintenance
Console port number is 80. Accordingly, the address to enter to connect to the PBX for the first time will
be as follows (enter the address exactly as shown):
http://192.168.0.101
Note
The default subnet mask for the LAN port is 255.255.255.0.
Internet Connection (SSL Connection):
When the PC is accessing the PBX from a connection over the internet, the use of SSL is strongly
recommended. When using an SSL encrypted connection, the default port is 443. The format of the address
to enter to connect to the PBX using an SSL encrypted connection will be as follows:
https://xxx.xxx.xxx.xxx:yyy
•
" xxx.xxx.xxx.xxx " is the IP address of a device that can be accessed from the Internet, such as the
IP address of a network router.
•
" yyy " is a port number. The network router’s port forwarding settings must be configured so that traffic
arriving at port "yyy" is forwarded to the correct IP address and port of the PBX in the LAN.
•
Port forwarding settings must specify the IP address and the port number of the network router
("
xxx.xxx.xxx.xxx:yyy ") to transfer the packets to the PBX in the LAN, so that the packets sent to the
global IP address and specified port of the router will be transferred to the IP address and specified
port of the PBX in the LAN.
•
Note the usage of "https" instead of "http".
•
If you connect to Web Maintenance Console using SSL, a security alert window is displayed. Follow
the prompts to install a security certificate. The procedure may vary according to your browser.
Note
The IP address and Web Maintenance Console port number for the PBX can be changed from their
default values. If settings for the LAN port’s IP address or port number has been forgotten, connect
using the MNT port connection as described above and confirm the LAN port’s IP address in
"28.1 Network Service—[1] IP Address/Ports—Basic Settings", and the port in "28.2.3 Network
Service—[2-4] Server Feature—HTTP" in the PC Programming Manual.
3.
The Web Maintenance Console login screen is displayed. Log in with the Installer level account name and
the default Installer level account password to launch the Easy Setup Wizard. For details about the Easy
Setup Wizard, see "5.4.1 Easy Setup Wizard".
202 Installation Manual
5.3 Starting Web Maintenance Console