manualshive.com logo in svg

Panasonic KX-NS1000, Installation Manual, Page: 150 / 416

Share
Download
Panasonic KX-NS1000 Installation Manual Download Page 150

4.3.2  Storage Memory Card (installed by default), Storage Memory
S Card (KX-NS0135), Storage Memory M Card (KX-NS0136),
Storage Memory L Card (KX-NS0137)

Function

Storage Memory Card 
(Installed by default):

Storage Memory with 2 hours Voice Mail recording time. To increase
recording time to a maximum of 15 hours, activate REC Time Expansion 
(KX-NSU001) activation key.

Storage Memory S:

Storage Memory with maximum of 200 hours Voice Mail recording time.

Storage Memory M:

Storage Memory with maximum of 450 hours Voice Mail recording time.

Storage Memory L:

Storage Memory with maximum of 1000 hours Voice Mail recording time.

Storage Memory Card

Storage Memory Card Slot

Mother Board

Accessories and User-supplied Items

Accessories (included):

 none

User-supplied (not included):

 none

Note

For installing and removing the Storage Memory Card, refer to "4.2.6  Installing/Removing the Storage
Memory Card".

150

Installation Manual

4.3.2 Storage Memory Card (installed by default), Storage Memory S Card (KX-NS0135), Storage Memory M Card (KX-

NS0136), Storage Memory L Card (KX-NS0137)

Summary of Contents for KX-NS1000

































































































































































































































































































































































































































Reviews:

No comments