Panasonic FP0H Series, User Manual

Page: 150 / 200

High-speed Counter Function
10-10
10.3.2 [F1 DMV] Elapsed Value Write / Read Instruction
Writes and reads the elapsed value of the high-speed counter.

Instruction format
R0
DT90300 K3000 F1 DMV
DT100 DT90300 F1 DMV
S
（ ）
DF
R1
（ ）
DF
D

Operand
Operand Settings
S
When setting: Area storing the elapsed value (32-bit) set in the high-speed counter or constant data
K−2,147,483,648 to K2,147,483,647
D
When reading: Area reading the elapsed value of the high-speed counter

Memory area type that can be specified
Operand WX WY WR WL SV EV DT LD I
Constant
Index
modifier
K H
S
A A A A A A A A A A A A
D -
A A A A A A A A
- -
A

Outline of operation (Reading elapsed value)
• Reads the content of the special data register storing the elapsed value of the high-speed
counter and writes to the area specified by [D].

Outline of operation (Setting elapsed value)
• At the same time as writing the value to the elapsed value area of the high-speed counter
which uses 32-bit data specified by [S], sets it in the elapsed value area of the high-speed
counter used within the system.

Precautions during programming
• Only F1 (DMV) instruction can perform the writing. The writing cannot be performed by other
high-level instructions such as transfer instruction F0 (MV) and arithmetic instructions.
• Specify the memory area of [S] or [D] with the memory area number for the lower 16 bits.
REFERENCE
• For details of the allocations of I/O and flags, refer to "12.2.4 When Using
High-speed Counter Function".
• For details of the FP Σ mode, refer to "11. FP Σ Mode".